(325) 219-0005
Lone Star Cooling and Heating
Español(325) 219-0005
Call (325) 219-0005

Storm & Hail Damage Repair in Clyde

We inspect storm-damaged heating and cooling equipment, identify damage that affects operation, and repair the parts that need attention. Our work focuses on getting a clear picture of the unit before hidden damage turns into a breakdown under heavier use.

(325) 219-0005

Storm impacts often leave damage that does not stop the system at once

Hail strikes the thin fins around an outdoor coil, while high wind can shift guards and panels, drive debris into the unit, or hit the cabinet and electrical components. The equipment may still start and run after the storm, even when airflow, fan clearance, or electrical connections have been affected.

After severe weather in Clyde, we inspect the coil for restricted airflow, make sure the fan has proper clearance, and check the cabinet for impact damage. We also look at disconnects, conduit, exposed wiring, and connections for damage or water intrusion.

The important distinction is between surface marks and damage that changes how the equipment sheds heat or operates safely. A bent panel may be cosmetic; flattened coil fins, a damaged fan area, or a compromised electrical connection needs closer attention before sustained summer cooling puts the system under load.

These signs call for a closer look after a storm

  • Flood water reached the equipment

    Water that reaches outdoor equipment can soak controls, motors, and wiring. It can also affect a furnace or air handler located below ground level. Equipment that has been under water is checked and dried before power is restored, and submerged parts often need replacement.

  • The system will not start after the storm

    Lightning nearby or the surge when power returns can damage control boards, capacitors, and compressors. When the system stays silent or the fan runs without heating or cooling, we test the electrical components to identify the part affected.

  • Hail flattened the outdoor coil fins

    The coil’s thin metal fins bend easily under hail. Small areas of damage are often cosmetic, but broad sections of flattened fins restrict the airflow needed to release heat. We determine whether the fins can be straightened or whether the tubing behind them has also been damaged.

  • The outdoor unit was moved or hit

    Strong wind or a falling limb can move an outdoor unit from its pad or bend the copper lines leading into the building. Kinked or cracked lines can lose refrigerant, so the lines and their connections are checked before the system runs again.

  • Debris is packed into or against the unit

    Leaves and branches pressed against the coil reduce airflow. Material that falls through the top grille can bend a fan blade or jam the motor. We check the fan and motor with the power off before operating the unit.

The full repair decision starts with the condition of the equipment

Storm damage repair is not limited to the first mark visible on the cabinet. The full service page explains how damaged equipment is inspected, how repair options are considered, and how the decision is usually made when a storm has affected an HVAC system. It also gives a broader view of the checks involved when airflow, mechanical parts, or electrical controls are in question.

Clyde

A call is enough to start with what you noticed

You do not need to know whether the damage is cosmetic, mechanical, or electrical before you call. Tell us what happened to the equipment and what the system is doing now, and we can inspect the storm damage and discuss the next step.

(325) 219-0005